AZ-700 — questions

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled. You configure the application gateway to direct traffic to the URL of the application gateway. You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error. You need to ensure that the URL is accessible through the application gateway from any IP address. Solution: You configure a custom cookie and an exclusion rule. Does this meet the goal?

You have an Azure subscription that contains the public IP addresses shown in the following table. You plan to deploy a NAT gateway named NAT1. Which public IP addresses can be used as the public IP address for NAT1?

You have an Azure application gateway named AGW1 that has a routing rule named Rule1. Rule 1 directs traffic for http://www.contoso.com to a backend pool named Pool1. Pool1 targets an Azure virtual machine scale set named VMSS1. You deploy another virtual machine scale set named VMSS2. You need to configure AGW1 to direct all traffic for http://www.adatum.com to VMSS2. The solution must ensure that requests to http://www.contoso.com continue to be directed to Pool1. Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled. You configure the application gateway to direct traffic to the URL of the application gateway. You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error. You need to ensure that the URL is accessible through the application gateway from any IP address. Solution: You add a rewrite rule for the host header. Does this meet the goal?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled. You configure the application gateway to direct traffic to the URL of the application gateway. You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error. You need to ensure that the URL is accessible through the application gateway. Solution: You disable the WAF rule that has a ruleId 920300. Does this meet the goal?

You have an Azure subscription that contains an Azure App Service app. The app uses a URL of https://www.contoso.com. You need to use a custom domain on Azure Front Door for www.contoso.com. The custom domain must use a certificate from an allowed certification authority (CA). What should you include in the solution?

You have an Azure application gateway for a web app named App1. The application gateway allows end-to-end encryption. You configure the listener for HTTPS by uploading an enterprise-signed certificate. You need to ensure that the application gateway can provide end-to-end encryption for App1. What should you do?

You have an Azure application gateway named AppGW1 that balances requests to a web app named App1. You need to modify the server variables in the response header of App1. What should you configure on AppGW1?

You have an Azure Virtual Desktop deployment that has 500 session hosts. All outbound traffic to the internet uses a NAT gateway. During peak business hours, some users report that they cannot access internet resources. In Azure Monitor, you discover many failed SNAT connections. You need to increase the available SNAT connections. What should you do?

You have an Azure subscription that contains the public IPv4 addresses shown in the following table. You plan to create a load balancer named LB1 that will have the following settings: • Name: LB1 • Location: West US • Type: Public • SKU: Standard Which public IPv4 addresses can be used by LB1?

You have the Azure environment shown in the exhibit. VM1 is a virtual machine that has an instance-level public IP address (ILPIP). Basic Load Balancer uses a public IP address. VM1 and VM2 are in the backend pool. NAT Gateway uses a public IP address named IP3 that is associated to SubnetA. VNet1 has a virtual network gateway that has a public IP address named IP4. When initiating outbound traffic to the internet from VM1, which public address is used?

You are configuring two network virtual appliances (NVAs) in an Azure virtual network. The NVAs will be used to inspect all the traffic within the virtual network. You need to provide high availability for the NVAs. The solution must minimize administrative effort. What should you include in the solution?

You have five virtual machines that run Windows Server. Each virtual machine hosts a different web app. You plan to use an Azure application gateway to provide access to each web app by using a hostname of www.contoso.com and a different URL path for each web app, for example: https://www.contoso.com/app1. You need to control the flow of traffic based on the URL path. What should you configure?

You plan to publish a website that will use an FQDN of www.contoso.com. The website will be hosted by using the Azure App Service apps shown in the following table. You plan to use Azure Traffic Manager to manage the routing of traffic for www.contoso.com between AS1 and AS2. You create a Traffic Manager profile named TMprofile1. TMprofile1 uses the weighted traffic-routing method. You need to ensure that Traffic Manager routes traffic for www.contoso.com. Which DNS record should you create?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled. You configure the application gateway to direct traffic to the URL of the application gateway. You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error. You need to ensure that the URL is accessible through the application gateway from any IP address. Solution: You create a WAF policy exclusion for request headers that contain 137.135.10.24. Does this meet the goal?

You have a website that uses an FQDN of www.contoso.com. The DNS record for www. contoso.com resolves to an on-premises web server. You plan to migrate the website to an Azure web app named Web1. The website on Web1 will be published by using an Azure Front Door instance named ContosoFD1. You build the website on Web1. You plan to configure ContosoFD1 to publish the website for testing. When you attempt to configure a custom domain for www.contoso.com on ContosoFD1, you receive the error message shown in the exhibit. (Click the Exhibit tab.) You need to test the website and ContosoFD1 without affecting user access to the on-premises web server. Which record should you create in the contoso.com DNS domain?

You have the Azure load balancer shown in the Load Balancer exhibit. LB2 has the backend pools shown in the Backend Pools exhibit. You need to ensure that LB2 distributes traffic to all the members of VMSS1. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

You have an Azure subscription that contains the following resources: • A virtual network named Vnet1 • Two subnets named subnet1 and AzureFirewallSubnet • A public Azure Firewall named FW1 • A route table named RT1 that is associated to Subnet 1 • A rule routing of 0.0.0.0/0 to FW1 in RT1 After deploying 10 servers that run Windows Server to Subnet 1, you discover that none of the virtual machines were activated. You need to ensure that the virtual machines can be activated. What should you do?

You have an Azure Front Door instance that has a single frontend named Frontend1 and an Azure Web Application Firewall (WAF) policy named Policy1. Policy1 redirects requests that have a header containing "string1" to https://www.contoso.com/redirect1. Policy1 is associated to Frontend1. You need to configure additional redirection settings. Requests to Frontend1 that have a header containing "string2" must be redirected to https:// www.contoso.com/redirect2. Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

You have 10 Azure App Service instances. Each instance hosts the same web app. Each instance is in a different Azure region. You need to configure Azure Traffic Manager to direct users to the instance that has the lowest latency. Which routing method should you use?