Page 53 of 60 · 1182 total questions.
Refer to the exhibit. Which per-hop QoS behavior is R1 applying to incoming packets?
The correct answer is C. Option C: queuing
What is the role of the root port in a switched network?
The correct answer is C. Option C: It is the best path to the root from a nonroot switch.
Explanation
PAT distinguishes many inside sessions on one public address by translating transport-layer ports.
What is the temporary state that switch ports always enter immediately after the boot process when Rapid PVST+ is used?
The correct answer is D. Option D: discarding
What is used to identify spurious DHCP servers?
The correct answer is D. Option D: DHCPDISCOVER
Explanation
DHCP dynamically supplies clients with IP configuration parameters.
Refer to the exhibit. A packet sourced from 10.10.10.1 is destined for 172.16.3.254. What is the subnet mask of the destination route?
The correct answer is B. Option B: 255.255.254.0
Refer to the exhibit. IPv6 must be implemented on R1 to the ISP. The uplink between R1 and the ISP must be configured with a manual assignment, and the LAN interface must be self-provisioned. Both connections must use the applicable IPv6 networks. Which two configurations must be applied to R1? (Choose two.)
The correct answer is B, E. Option B: interface Gi0/0ipv6 address 2001:db8:0:AFFF::/64 eui-64 Option E: interface Gi0/1ipv6 address 2001:db8:0F1B:FCCB:ACCE:FCED:ABCD:FA00:/127
Explanation
OSPF elects a designated router on multiaccess networks to reduce adjacency and LSA exchange overhead. IPv6 uses 128-bit addresses and relies on Neighbor Discovery rather than ARP.
Refer to the exhibit. What does the host do when using the IPv4 Preferred function?
The correct answer is B. Option B: It requests the same IPv4 address when it renews its lease with the DHCP server.
Explanation
OSPF elects a designated router on multiaccess networks to reduce adjacency and LSA exchange overhead. DHCP dynamically supplies clients with IP configuration parameters.
Refer to the exhibit. What is preventing host A from reaching the internet?
The correct answer is B. Option B: The domain name server is unreachable.
What are two capabilities provided by VRRP within a LAN network? (Choose two.)
The correct answer is A, C. Option A: redundancy Option C: load sharing
Which AP mode is used for capturing wireless traffic and forwarding that traffic to a PC that is running a packet analyzer?
The correct answer is D. Option D: sniffer
Refer to the exhibit. The IPv6 address for the LAN segment on router R2 must be configured using the EUI-64 format. When configured which ipv6 address is produced by the router?
The correct answer is D. Option D: 2001:db8:d955:1008:10D8:BAFF:FEC2:1
Which components are contained within a virtual machine?
The correct answer is B. Option B: configuration files backed by physical resources from the Hypervisor
Which interface IP address serves as the tunnel source for CAPWAP packets from the WLC to an AP?
The correct answer is C. Option C: AP-manager
What does a switch search for in the CAM table when forwarding a frame?
The correct answer is D. Option D: destination MAC address and destination port
Explanation
OSPF elects a designated router on multiaccess networks to reduce adjacency and LSA exchange overhead. NAT translates addresses between network domains, commonly conserving public IPv4 addresses.
Which port type does a lightweight AP use to connect to the wired network when configured in FlexConnect mode with local switching and VLAN tagging?
The correct answer is C. Option C: EtherChannel
Explanation
EtherChannel bundles compatible physical links into one logical link for redundancy and capacity.
Refer to the exhibit. PC A is communicating with another device at IP address 10.227.151.255. Through which router does router Y route the traffic?
The correct answer is D. Option D: router D
Refer to the exhibit. VoIP is being implemented in the network using VLAN ID 73 and named "VoIP". Each user needs a Cisco IP phone at their desk. Switchport e0/0 has been configured as an access port in the data VLAN. Cisco Discovery Protocol is enabled globally. Which command sequence completed the configuration?
The correct answer is D. Option D: vlan 73name VoIPe0/0switchport voice vlan 73
Explanation
A VLAN creates a separate Layer 2 broadcast domain on switched infrastructure.
Refer to the exhibit. Which IP route command created the best path for a packet destined for 10.10.10.3?
The correct answer is B. Option B: ip route 10.10.10.0 255.255.255.240 g0/0
Which cable type must be used when connecting a router and switch together using these criteria? • Pins 1 and 2 are receivers and pins 3 and 6 are transmitters. • Auto detection MDI-X is unavailable.
The correct answer is A. Option A: crossover
Which protocol does a REST API use to communicate?
The correct answer is D. Option D: HTTP
Showing questions 1041–1060 of 1182 · Page 53 of 60